5 - 1Chapter 5 Parts ListChapter 5 Parts ListEngineParts ListCaution when using parts list: The Item Numbers in the illustrations have the corresponding Item Numbers in the list. The notation of PL "X.Y.Z" is composed of the plate (PL), item "X.Y", and parts "Z". The alphabet characters in the illustrations represent screws and clips as follows:"S": screw, "E": E-ring, "KL": KL clip, "C": C-ring, and "N": nut "T" mark in the illustrations are attached to items indicating assembly parts in the illustrations. Encircled alphabetical figures in the illustrations indicate interrupted leader lines. Same charactersin the illustrations represent lines to be connected. The mark "(with 2-5)" attached to assembly parts on the illustrations and lists represents that theitems "2, 3, 4, and 5" of that plate are contained and the mark "(with 2-5, PL6.1.1) represent thatthe item "2, 3, 4, and 5" of that plate and the item "1" of the plate "6.1" are contained. The mark "[Same PLX.Y.Z]" attached to parts in the illustrations and lists resents that the parts isthe same as the parts of the item "Z" of the plate "X.Y". The mark " " attached to the item in the list represents "recommended spare parts" which can beusually supplied. (Supply of other parts shall be examined separately.) The mark "∗" attached to parts in the list represents "Note" or "Reference" about that parts is con-tained in the same page. "HIGH ASSY" in the list represent the high level assembly containing a specific part/s.For spare parts, refer to the "Spare parts list" which is issued separately.For the connector (P/J), parts such as harness, wire, etc. in the list, refer to "Chapter 7,Electric wiring"It should be noted that configuration of parts may be different or some parts are not useddepending on specifications of OEM.
