Vacon NX Series Applications Manual
Also see for NX series: User manualUser manualApplications manualMaintenance manualOperating guide
                                                                                                                                                                                                                                                                                                                                                                                           | |
Contents
| 
7.3 Control signal logic in Pump and Fan Control Application 1727.4 Pump and Fan Control Application - Parameter lists 1727.4.1 Monitoring values (Control keypad: Menu M1) 1727.4.2 Basic parameters (Control keypad: Menu M2 -> G2.1) 1757.4.3 Input signals 1777.4.4 Output signals 1837.4.5 Drive control parameters (Control keypad: Menu M2 -> G2.4 1907.4.6 Prohibit frequency parameters (Control keypad: Menu M2 -> G2.5) 1917.4.7 Motor control parameters (Control keypad: Menu M2 -> G2.6) 1927.4.8 Protections (Control keypad: Menu M2 -> G2.7 1937.4.9 Autorestart parameters (Control keypad: Menu M2 -> G2.8) 1957.4.10 Pump and fan control parameters (Control keypad: Menu M2 -> G2.9)1967.4.11 Keypad control (Control keypad: Menu M3) 1987.4.12 System menu (Control keypad: Menu M6) 1987.4.13 Expander boards (Control keypad: Menu M7 1988 Monitoring value descriptions 1999 Parameter descriptions 2059.1 Keypad control parameters 3519.2 Master/follower function (NXP only) 3539.2.1 Master/follower link physical connections 3539.2.2 Optical fibre connection between AC drives with OPTD2 3539.3 External brake control with additional limits (IDs 315, 316, 346 to 349, 352, 353)3549.4 Parameters of motor thermal protection (IDs 704 to 708) 3559.5 Parameters of stall protection (IDs 709 to 712) 3569.6 Parameters of underload protection (IDs 713 to 716) 3569.7 Fieldbus control parameters (IDs 850 to 859) 3579.7.1 Process data out (slave -> master) 3579.7.2 Current scaling in different size of units 3579.7.3 Process data in (master -> slave) 3589.8 Closed loop parameters (IDs 612 to 621) 3599.9 "Terminal to function" (TTF) programming principle 3609.9.1 Defining an input/output for a certain function on keypad 3609.9.2 Defining a terminal for a certain function with NCDrive programmingtool 3619.9.3 Defining unused inputs/outputs 3629.10 Speed control parameters (application 6 only) 3639.11 Automatic changing between drives (application 7 only) 3659.12 Interlock selection (P2.9.23) 3669.13 Examples of Autochange and Interlock selection 3679.13.1 Pump and fan automatics with interlocks and no autochange 3679.13.2 Pump and fan automatics with interlocks and autochange 36810 Fault tracing 37110.1 Fault codes 371VACON · 10 TABLE OF CONTENTSLOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/ |
Related manuals for Vacon NX series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine