3 LOCAL/REMOTE CONTROL APPLICATION3.1 INTRODUCTIONSelect the Local/Remote Control Application in menu M6 on page S6.2.With the Local/Remote Control Application it is possible to have two different control places.For each control place the frequency reference can be selected from either the controlkeypad, I/O terminal or fieldbus. The active control place is selected with the digital inputDIN6.• All outputs are freely programmable.Additional functions:• Programmable Start/Stop and Reverse signal logic• Reference scaling• One frequency limit supervision• Second ramps and S-shape ramp programming• Programmable start and stop functions• DC-brake at stop• One prohibit frequency area• Programmable U/f curve and switching frequency• Autorestart• Motor thermal and stall protection: Programmable action; off, warning, faultThe parameters of the Local/Remote Control Application are explained in Chapter 9Parameter descriptions of this manual. The explanations are arranged according to theindividual ID number of the parameter.LOCAL/REMOTE CONTROL APPLICATION VACON · 39LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/ 3
