3.3 CONTROL SIGNAL LOGIC IN LOCAL/REMOTE APPLICATIONDIN3 ≥ 1DIN6DIN2DIN3AI1AI2DIN1DIN2DIN3DIN4DIN5ABABAB Internal reverseInternal fault resetFault reset input (programmable)3.3 Keypad directionInternal Start/StopReference from fieldbusStart/Stop from fieldbusDirection from fieldbusStart/Stop buttonsReset buttonStart forward(programmable)Start reverse(programmable)Start forwardStart reverse(programmable)(programmable)Start/StopReverseUpDown3.1 Controlplace2.1.15 Jogging speed ref.2.1.14 Fieldbus Ctrl reference2.1.13 Keypad Ctrl reference2.1.12 I/O B reference2.1.11 I/O A referenceR3.2 Keypad referenceMotorpotentiometerProgrammableStart/Stop andreverse logic BProgrammableStart/Stop andreverse logic AInternalfrequency ref.Fig. 9: Control signal logic of the Local/Remote Control Application3.4 LOCAL/REMOTE CONTROL APPLICATION - PARAMETER LISTS3.4.1 MONITORING VALUES (CONTROL KEYPAD: MENU M1)The monitoring values are the actual values of parameters and signals as well as statusesand measurements. Monitoring values cannot be edited.VACON · 42 LOCAL/REMOTE CONTROL APPLICATION3 LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
