2 STANDARD APPLICATION2.1 INTRODUCTIONSelect the Standard Application in menu M6 on page S6.2.The Standard Application is typically used in pump and fan applications and conveyors forwhich the Basic Application is too limited but where no special features are needed.• The Standard Application has the same I/O signals and the same control logic as theBasic Application.• Digital input DIN3 and all the outputs are freely programmable.Additional functions:• Programmable Start/Stop and Reverse signal logic• Reference scaling• One frequency limit supervision• Second ramps and S-shape ramp programming• Programmable start and stop functions• DC-brake at stop• One prohibit frequency area• Programmable U/f curve and switching frequency• Autorestart• Motor thermal and stall protection: Programmable action; off, warning, faultThe parameters of the Standard Application are explained in Chapter 9 Parameterdescriptions of this manual. The explanations are arranged according to the individual IDnumber of the parameter.STANDARD APPLICATION VACON · 19LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/ 2
