5.4.3 INPUT SIGNALSTable 36: Input signals, G2.2Index Parameter Min Max Unit Default Cust ID DescriptionP2.2.1 ** DIN2 function 0 13 1 3190 = Not used1 = External faultcc2 = External faultoc3 = Run enable4 = Acc/Dec timeselection5 = CP: I/O termi-nal (ID125)6 = CP: Keypad(ID125)7 = CP: Fieldbus(ID125)8 = Forward/Reverse9 = Jogging fre-quency (cc)10 = Fault reset(cc)11 = Acc/Dec pro-hibit (cc)12 = DC brakingcommand13 = Motor pot. UP(cc)P2.2.2 ** DIN3 function 0 13 10 301See above except:13 = Motor pot.DOWN (cc)P2.2.3 ** DIN5 function 0 13 9 330See above except:13 = Enable PIDreference 2P2.2.4 ** PID sum point ref-erence 0 7 0 3760 = Direct PID out-put value1 = AI1+PID output2 = AI2+PID output3 = AI3+PID output4 = AI4+PID output5 = PID keypad+PID output6 = Fieldbus+PIDoutput (Process-DataIN3)7 = Mot.pot.+PIDoutputVACON · 94 PID CONTROL APPLICATION5 LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
