172 LED SignalingWAGO-I/O-SYSTEM 750I/O-IPC-C10E, CANopen Master15.2 Error Messages via I/O-LEDError messages and warnings of the I/O-IPC are displayed by the I/O-LED (38)using blink code. The number of blink pulses indicates the error code and errorargument. I/O modules that do not supply any data are not considered (e.g., powersupply module without diagnostics).If there are several error messages, the first message to occur chronologicallyalways blinks until it is corrected. Only then will any subsequent error message bedisplayed.RSTStopRunU1IDE/PWRIOERRSTARDYRUNU2 AB CDFigure 115: Display of blink codes by the I/O-LED38
