Configuration 59WAGO I/O-SYSTEM 750I/O-IPC-C10E, CANopen Master9 Configuration9.1 Web-Based Management (WBM)The implemented HTML pages (abbreviated as "pages" in the following) forWeb-Based Management are used to configure the I/O-IPC. To access Web-Based Management, proceed as follows:1. Connect the I/O-IPC with the LAN via X9 Ethernet interface.2. To access the pages, start your internet browser and enter the preset IPaddress 192.168.2.17 in the address bar.NoteIf the I/O-IPC does not display the start page, make sure that your internetbrowser settings allow the circumvention of the proxy server for local addresses.Also check whether your PC is located in the same subnet as the I/O-IPC.Except for the "Information" and "WebVisu" pages, all WBM pages are passwordprotected. The first time you select an item from the navigation bar, the passwordquery appears:Figure 26: Entering the authentification
