XEROX WIDE FORMAT COPY SYSTEM Main Menu • 105NOTE: The XXXX represents the Printer name 721FINISHERMODEL:NOTE: This screen identifies the Finisher, if any. If there is no finisher,the MODEL is displayed as NONE. If a Folder is connected, theFINISHER screen displays the configuration of the connected Folder.7. Press the Exit key to return to the SYSTEM DESCRIPTIONscreen.The RECENT FAULT LIST option of the SYSTEM INFORMATION menudisplays the most recent faults related to the Scanner. Fault messagesare stored in the Controller. Each fault message contains a fault codeand a digital time stamp. When you call for service, the service centermay ask you for this information.To display the recent fault list:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Next key to highlight SYSTEM INFORMATION.3. Press the Enter key to select SYSTEM INFORMATION. TheSYSTEM INFORMATION menu screen is displayed.4. Press the Next key to highlight RECENT FAULT LIST.5. Press the Enter key to select RECENT FAULT LIST. TheRECENT FAULT LIST screen is displayed. Below is an exampleof the RECENT FAULT LIST screen.RECENT FAULT LIST37449914 5000000837449868 500000086. Press the Previous or Next key to scroll through the list.7. Press the Exit key to return to the SYSTEM INFORMATIONmenu screen.RECENT FAULT LIST
