XEROX WIDE FORMAT COPY SYSTEM Special features keys • 63NOTE: You can replace the contents of a used location with the currentjob settings information. If you choose a location that already containsinformation, the TEMPLATE IS IN USE screen is displayed as shownbelow. Press the Enter key to overwrite the contents. Press the Exit keyto cancel the operation.TEMPLATE IS IN USEPRESS ENTER TO CONTINUEEXIT TO ABORT8. Press the Enter key to return to the READY screen.Use the DELETE TEMPLATE option to delete previously savedtemplates. Doing so leaves the template location blank and available touse again. Once a template has been deleted, it cannot be recalled.To delete a saved template:1. Press the Store/Recall key. The STORE/RECALL menu screenis displayed.2. Press the Next key to highlight JOB TEMPLATES.3. Press the Enter key to select JOB TEMPLATES. The JOBTEMPLATES menu screen is displayed.4. Press the Next key until DELETE TEMPLATE is highlighted.5. Press the Enter key to select DELETE TEMPLATE. TheDELETE TEMPLATE screen is displayed. This screen indicatesthe locations for the templates currently in use. Locations thatdo not contain a template are not shown.Below is an example of the DELETE TEMPLATE screen.DELETE TEMPLATETEMPLATES IN USE: 1 2 3 4 5ENTER TEMPLATE NUMBER: 06. Use the numeric keypad to enter the location of the template tobe deleted, then press the Enter key. The deleted location isremoved from the list in the DELETE TEMPLATE screen and thecontents of that location are deleted.You can now select other locations to be deleted in the same way.7. If no more locations are to be deleted, press the Exit key toreturn to the READY screen.Deleting Job Templates
