78 •Special features keys XEROX WIDE FORMAT COPY SYSTEMand the Printer Interrupt indicator lamp illuminates. The Printerimmediately prints a sample of the next image inserted into theScanner. The SAMPLE MODE screen is displayed.SAMPLE MODEPRESS START TO ACCEPT PAGE.PRESS C/CA TO REJECT.2. Do one of the following:• Press the Start key to print the complete image as a full-sizecopy.• Press the C/CA key to delete the scanned image.3. Press the Sample key again to disable the Sample feature. ThePrinter is returned to the default priority setting and the Sampleand Printer Interrupt indicator lamps are extinguished.The best sample prints will be produced if the image enhancementfeatures have been enabled. Refer to the Image Quality section for moreinformation.In order to have the selections indicated below in the SAMPLE MODEscreen, the Scan-to-Net feature key must be installed to get SCANIMAGE TO FILE, and the Scan-to-Print Feature key must be installed toget SCAN IMAGE TO PRINTER. The Scan-to Print feature is useful onthe X2 TECH that does not have a COPY Mode. However it isconvenient on the other WIDE FORMAT COPY SYSTEMS to be able tomake a sample before scanning an image to file.To print a sample copy, perform the following:1. If the scanner is set to COPY mode switch to SCAN mode forinstructions, refer to “Switching between COPY mode and SCANmode”2. Enter the Directory name.3. Press the Sample special function key. The SAMPLE MODEscreen is displayed.SAMPLE MODE4 SCAN IMAGE TO FILESCAN IMAGE TO PRINTER4. Press the Next key to highlight SCAN IMAGE TO PRINTER.NOTE: The SCAN IMAGE TO FILE and SCAN IMAGE TO PRINTERoptions can be individually or simultaneously selected. However, youcannot deselect both optionsScan Mode Sample:
