XEROX WIDE FORMAT COPY SYSTEM Special features keys • 69The OUTPUT BIN option enables you to specify which finisher output binto use for the finished output. The choices are DON'T CARE, BIN X(where X equals 1 to the actual number of finisher bins), FANFOLD, andBYPASS. BYPASS is the factory default setting.OUTPUT BINOUTPUT BIN: BYPASSSets Build keyThe Sets Build mode allows you to scan a series of images and build anelectronically collated set. Once the set is built, one or more collatedcopies can be printed.NOTE: The Sets Build mode is not available unless the WIDE FORMATCOPY SYSTEM is in the COPY mode.NOTE: Any of the finishing options can be changed during a Sets Buildjob. The option(s) must be changed before the document to be copied isinserted.In Sets Build mode, documents of C (A2) size and larger are normallydelivered to the rear of the Scanner after the scan. If the DOCUMENTRETURN parameter is set to REAR, then all documents are delivered tothe rear after scanning. The WIDE FORMAT SCAN SYSTEM isequipped with a document catching device, called the Stacker, to receivethese documents. Refer to "Scanner Control" in the "Main Menu" sectionof this manual for further information about the DOCUMENT RETURNparameter.To build a collated set:1. Press the Sets Build key. The Sets Build indicator lampilluminates and the SETS BUILD screen are displayed.SETS BUILDCOLLATION: FORWARDOUTPUT BINPreparing to build thesetBuilding and printingthe set
