Xerox 8825 User Manual

Also see for 721: Operator's manual Setup guide User guide Release note Release note

Contents

Xerox 8825 User Manual Manual pdf 49 page image

XEROX WIDE FORMAT COPY SYSTEM Image Quality • 434. Do one of the following:• For PREVIEW, press the Enter key to enable or disable theoption. A check mark appears in the box to the left of the optionwhen the option is enabled. The factory default setting isenabled.• For COMPRESSION, press the Previous or Next key tohighlight the desired setting. Then press the Enter key to selectthe highlighted format. The choices are RAW and PACKBITS.The factory default setting is RAW5. For FILE FORMAT, the selection is TIFF, Repeat steps 3 and 4to change the remaining setting, if desired.6. Press the Enter key to confirm the selection.7. Press the Exit key to return to the Ready screen.Color — Select Color when scanning full color documents. When ColorType is select a version of the following screens will be displayed. Thecontent of the screen will depend on the selected FORMAT andCOMPRESSION.These screen will only be displayed in SCAN mode when the Scan toNet and Color Scanner feature keys are installed. The Normal andPhoto LEDs will be lit when Color is selected.To select the scan options for Color Mode:1. Press the Mode key. The Please Enter Directory screen isdisplayed.2. Enter the Directory Name. The READY TO SCAN INSERTDOCUMENT screen is displayed.3. Select the Color by pressing the arrow key below Original, Typekey until the Normal and Photo lights come on. The SCANOPTIONS (COLOR) screen is displayed.4. Use the Enter key to enable/disable checkbox selection and theNext or Previous Key to select options with a colon (e.g.FORMAT: TIFF).The options available for selections displayed on the screen will changedepending on the FORMAT and COMPRESSION that are selected.Listed below are the selections and available options and their definition:• PREVIEW - Use this checkbox to enable or disable thegeneration of a preview image for your scanned document.Default is enabled (checkbox is checked)• FORMAT - Use this selection to determine which format youwould like to have the scanned image saved in, TIFF or JPEG.Default is TIFF.• COMPRESSION (TIFF selected) - Use this selection todetermine the compression method to apply to the saved TIFFdocument. Select one of the following:• PACKBITS - Saves the document as 24-bit RGBcompressed.Type, Color