Xerox 8825 User Manual

Also see for 721: Operator's manual Setup guide User guide Release note Release note

Contents

Xerox 8825 User Manual Manual pdf 56 page image

50 •Making copies XEROX WIDE FORMAT COPY SYSTEMMaking a copy with the defaultsettingsWhen the default document settings are used, the display indicates thatthe roll of media that best fits the size of the original document will beautomatically selected. The reduction/ enlargement setting is 100%, sothe copy will be the same size as the original document. The copyquantity is set to 1.The illustration below shows the READY screen in its default state.READY TO COPYINSERT DOCUMENT100.0%AUTO1NOTE: Many document settings other than the default settings arepossible. For example, the options keys on the Scanner Control Panelallow you to control the media selection, image quality andreduction/enlargement percentage. The Transform special features keyallows you adjust the margins around the image, specify the position ofthe image on the media, and transform the image into a mirror and/orinverted image. Refer to the applicable sections of this guide for detailedinformation about the many document settings available to you.NOTE: When scanning to print, the copy is made using the currentPrinter processing defaults including margins. If the image beingscanned is the same size as the media being used, set the margins to 0(zero) to prevent the image from bieng clipped or select a larger mediasize.To make a copy using the default document settings:1. Insert the original document face down and centered on theDocument Feed-in Tray of the Scanner.NOTE: If the document is not exactly centered and the AUTOCENTERfeature is enabled, the Scanner will automatically correct the problemelectronically. The resulting image will still be correctly positioned on theoutput media. If AUTOWIDTH/AUTOCENTER is disabled, you will needto carefully center the document when inserting it. Refer to "Controllingthe scan" on the previous page. AUTOWIDTH/AUTOCENTER is notavailable in the PRODUCTIVITY mode, requiring the user to manuallyalign the document within the appropriate document size guidelines onthe Feed-in Tray.2. Gently move the document forward until the lead edge engagesthe feed rolls. The Scanner transports the document to the