132 •Main Menu XEROX WIDE FORMAT COPY SYSTEM17. Press the Exit key to return to the Component Tests menuscreen.The READ NVR option allows the examination of the contents of thenon-volatile RAM (NVR). The service center may ask you to provide thisinformation when calling for service.To run the READ NVR diagnostic:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Next key until DIAGNOSTICS is highlighted.3. Press the Enter key to select DIAGNOSTICS. TheDIAGNOSTICS menu screen is displayed.4. Press the Next key until SCANNER DIAGNOSTICS is displayed.5. Press the Enter key to select SCANNER DIAGNOSTICS. TheSCANNER DIAGNOSTICS menu screen is displayed.6. Press the Next key until READ NVR is highlighted.7. Press the Enter key to select READ NVR. The READ NVRscreen is displayed. An "xx" displays for all the NVR values.READ NVR00 -07: xx xx xx xx xx xx xx xx08 - 0F:10-17:18-1F:xx xx xx xx xx xx xx xxxx xx xx xx xx xx xx xxxx xx xx xx xx xx xx xxPRESS START TO BEGIN8. Press the Start key to display the actual values.9. Press the Previous or Next key to scroll through the values.There are 16 rows of values in all.10. Press the Exit key to return to the SCANNER DIAGNOSTICSscreen.The PASSWORD option of the DIAGNOSTICS menu is for use by theCustomer Service Engineer only. It allows the Customer ServiceEngineer to enter the password for access to password-protecteddiagnostic functions.If you select this option, the PASSWORD screen is displayed. Youcannot perform any functions in this screen. Press the Exit key to returnto the COMPONENT TESTS menu screen.PASSWORDENTER PASSWORD:READ NVRPASSWORD
