I-Class 13Setting Up the Printer3.0 InstallationThis section explains how to connect the printer, and load it with media andribbon.˛ Note: When connecting the AC Power Cord or interface cables to the printer,ensure the Power On/Off Switch is in the ‘Off’ position.å Place the printer on a firm, level surface.ç Turn ‘Off’ the Host Computer and ensure that the Power Switch on thePrinter is in the ‘Off’ position.é Depending upon your interfacing requirements, connect the appropriateinterface cable between Host Computer and Printer; see Section 3.0.1.è Connect the AC Power Cord to the receptacle on the back of the Printer,and then plug the AC Power Cord into a properly grounded outlet. (Thepower supply automatically detects and then adjusts to the applied linevoltage; see Section 7.0 for the acceptable voltage ranges.)+ If connecting the printer to a network or USB port, refer to the additionaldocumentation supplied with that option.
