26 I-Class3.5.2 On-Demand DispensingWhen equipped with the Peel and Present option, labels are dispensed thenseparated automatically from the liner for immediate application.å With the Peel and PresentMechanism installed on theprinter, pull outward on theLatch and allow the RollerBracket to swing forward.ç With media loaded asdescribed in Section 3.1, pressthe FEED Key to advanceapproximately 20 inches (51cm) of media. Remove all ofthe labels from the backingmaterial.é Route the backing material through the Roller Bracket as shown (thebacking should go under the top black roller, then out).è Raise the Roller Bracket up to its latched position.