I-Class 51System Settings (continued)MENU LANGUAGE ♦ Selects the language in which the menusystem messages and configuration labelare shown. Only languages that are residentwill be available.≤ENGLISH EnglishFRANCAIS FrenchITALIANO ItalianDEUTSCH GermanESPANOL SpanishUSER DEFINED User defined, downloaded language(s).FAULT HANDLING When a faulted condition (ribbon or paperout, failed bar code, etc.) has been detected,this setting determines the action to betaken by the operator and the printer.LEVEL Establishes the required corrective actionfollowing a fault.≤1 Stops and displays a fault message. TheFEED Key must be pressed to clear thefault and continue after the problem iscorrected by the operator.2 Displays a fault message after the printerbacks up and prints a VOID Message onthe defective label (no message will beprinted if there is insufficient space for theVOID text height on the defective label orif the fault occurred after the entire labelwas completed).˛ Note: The label is considered completed whenit reaches its present distance at or above theTOF.
