I-Class 334.0.6 Resetting the PrinterDepending upon the method used, there are three reset levels possible:4.0.6.1 Soft ResetTo reset the printer and clear any temporary host settings:With the printer ‘On’, press and hold the CANCEL Key for approximately fourseconds.4.0.6.2 Level One ResetTo return the printer to the factory default settings or, if saved, to restore theFactory Setting File:å Turn ‘Off’ the printer.ç Press and hold the PAUSE and CANCEL Keys while turning ‘On’ theprinter; continue to depress the keys until the ‘SYSTEM RESET’ messageflashes.˛ Note: This reset has the same effect as the System Settings / SetFactory Defaults selection in the menu system. (See Section 4.1for a listing of the factory default settings and Section 4.1.5 forinformation about the Factory Setting File.)4.0.6.3 Level Two ResetTo return the printer to the factory default settings, and clear all the calibrationand adjustment parameters:å Turn ‘Off’ the printer.ç Press and hold the PAUSE, FEED, and CANCEL Keys while turning ‘On’the printer; continue to depress the keys until the ‘SYSTEM RESET’message flashes.˛ Note: After executing a Level 2 Reset, the media calibration must beperformed; see Section 5.0. A listing of the factory defaultsettings can be found in Section 4.1.
