48 I-ClassSystem Settings (continued)˛ Note: As indicated, the following menu selections will only appearaccording to the model of your printer.PLUS EMULATION This instructs the firmware to processspecific DPL data as would theProdigy Plus® printer without all of thevariations. The calculated Columnposition based on 200 DPI using a 203DPI printhead.ENABLED This list of exceptions will be updatedwith new firmware releases:• Data Terminator – I 2 of 5 Barcodes(IDs D, J, and L), the first non-numeric character processed willterminate the barcode data field.• Bar Size – I 2 of 5 Barcode (ID L),when the bar size is specifiedgreater than P (25), the size isautomatically decreased to 10.• Human Readable Fonts – The EANand UPC barcodes (IDs B, C, F, G,M, and N) print a fixed font size.• Lines and boxes: Rotations 2 and 4are affected by the vertical multi-plication factor defined in the DPLDxx command.• Column positions greater than theprinthead width are adjusted back tothe printable area and printed.≤DISABLED The above exceptions are disabled.I-4206, I-4208, & I-4212 Models
