I-Class 374.1.3 Print Control+ Refer to Section 2.1.1 for detailed information on print quality controls.HEAT≤10 (0-30)Controls the ‘burn-time’ of the printhead. Thisis the equivalent of Heat Setting on most labelsoftware programs.PRINT SPEED Controls the rate of label movement duringthe printing process; see Appendix C.FEED SPEED Controls the rate of label movement betweenprinting areas; see Appendix C.REVERSE SPEED Controls the rate of label movement duringbackup positioning for start of print, cutting orpresent distance; see Appendix C.ROW OFFSET≤00.00in (0-99.99)Shifts the vertical start of print position. Thisis the user setting for row adjustment.COLUMN OFFSET≤00.00 in (0-99.99)Shifts the horizontal, left-justified start ofprint position to the right without shifting theLabel Width termination point to the right.This is the user setting for Column Adjust.PRESENT DISTANCE≤0.00 in (0-4.00)Sets the label stop position past the start ofprint. When the next label format is received,the printer will automatically backfeed to thestart position. If a quantity of more than onelabel is printed without a present sensorenabled, or if the present distance is set tozero, the printer will operate withoutreversing.