I-Class 354.1.1 Entrance and Exit PromptsWith ‘Ready’ displayed on the LCD, press the Key to enter Menu Mode.˛ Note: While in Menu Mode, the printer will stop processing new DPL (orbitmapped) data.MENU MODE Depending upon the configuration of theprinter, the following Entrance and ExitPrompts may be displayed when accessing orleaving the Menu System.ENTER PASSWORD0 0 0 0You are attempting to enter Menu Mode.Security has been enabled and now thecorrect user-definable password is requiredbefore accessing the Menu Mode functions.KEEP HOST CHANGES?ENTER = YESYou are now entering Menu Mode. ExistingHost commands have affected theconfiguration of the printer. Pressing ENTERwill save these changes; otherwise, theprinter will revert to previously savedsettings.SAVE CHANGES?ENTER = YESYou are now exiting Menu Mode, but havemade changes to the printer’s settings.Pressing ENTER will reconfigure yourprinter according to these changes;otherwise, the printer will revert topreviously saved settings.˛ Note: If changes have been made that require areset, the printer will automatically invoke thatreset.
