24 I-Class3.5 Outputting LabelsIn addition to directly outputting labels from the printer, there are severaloptional output configurations available.3.5.1 RewindingWith the Internal Media Rewinder option, the printer can wind the printed labelsand backing material. To rewind labels:˛ Note: When winding labels, do not allow the outer diameter of the roll toexceed 6 inches (154 mm) on the Media Rewind Hub.å Remove the Front Fascia.ç Remove the Tear Plate byfirst removing theThumbscrew.é Position the Rewind Plateon the printer and install andtighten the Thumbscrew.è If installed, remove theRewind Retainer and MediaClip from the MediaRewind Hub (see drawingnext page).ê Load media as described in Section 3.1, press the FEED Key and advanceapproximately 20 inches (51 cm) of media.
