2-54 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 ServiceError TroubleshootingError TroubleshootingADF JamThere is a jam at the ADF.Applicable Code• 005-121: ADF JamInitial Actions• Cycle printer power.• If the problem persists, use the following procedure.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ IP Board, PL7.3.3■ ADF Assembly, PL8.1.2■ ADF Cover, PL8.1.3■ ADF Separator Pad, PL8.1.4■ “Map 3 - IP Board” on page 7-8■ “Scanner” on page 7-28Troubleshooting Procedure TableStep Actions and Questions Yes No1 Is the ADF completely closed? Go to Step 2. Close ADF andgo to Step 2.2 Does the error persist? Go to Step 3. Complete.3 Reseat P/J1, P/J6, and P/J16 on theIP Board.Does the error persist?Go to Step 4. Complete.4 Does the ADF feed the document? Go to Step 5. Go to Step 7.5 Check the media path.Is there debris in the media path?Remove thedebris. Go toStep 6.Complete.6 Does the error persist? Go to Step 7. Complete.7 Clean the ADF feed rollers.Do the feed rollers rotate smoothly?Go to Step 8. Replace theADF(page 4-111).8 Replace the IP Board (page 4-103).Does the error persist?Replace theADF Cover(page 4-113)and ADFSeparator Pad(page 4-114).Complete.
