Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 3-9Image QualityLight or Undertone PrintThe overall image density is too light in all colors.Initial Actions• Check that the media settings match the media in use.• Check that the media is dry and in good condition.Troubleshooting Reference TableApplicable Parts Example Print■ Transfer Roller, PL1.1.11■ Toner Motor, PL4.1.2■ HVPS, PL7.1.2■ Scanner Assembly (3045NI)PL8.1.1■ Scanner Assembly (3045B) PL8.2.1Troubleshooting Procedure TableStep Actions and Questions Yes No1 Print a Test Print.The error persists.Go to Step 5. Go to Step 2.2 Scan the Test print.The error persists.Go to Step 3. Complete.3 Reseat Scanner connections to theIP Board.The error persists.Replace theScanner(page 4-109),go to Step 4.Complete.4 Does the image print correctly? Complete. Go to Step 5.5 Check the Toner Cartridge.The Toner Cartridge is installedcorrectly.Go to Step 5. Replace theTonerCartridge.6 Test the Toner Motor.The Toner Motor rotates.Go to Step 7. Replace theToner Motor(page 4-37).7 Replace the Transfer Roller(page 4-10).Does the error persist?Replace theHVPS(page 4-42).Complete.Light or Undertone Print
