xiv Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 ServiceManual OrganizationThe Phaser 3010/3040/WorkCentre 3045 Service Manual contains these sections:Introductory, Safety, and Regulatory Information: This section containsimportant safety information and regulatory requirements.Chapter 1 - General Information: This section contains an overview of theprinter’s operation, configuration, specifications, and consumables.Chapter 2 - Error Codes and Troubleshooting: This section provides detailedtroubleshooting procedures for error messages and codes generated by residentdiagnostics. Troubleshooting covers the operation of Power On Self Test (POST)and Service Diagnostics. In addition, this section includes troubleshootingmethods for situations where error indicator is not available.Chapter 3 - Image Quality Troubleshooting: This section focuses on techniquesto correct image quality problems associated with the printer output.Chapter 4 - Service Parts Disassembly: This section contains removal proceduresfor spare parts listed in the Parts List. A replacement procedure is included whennecessary.Chapter 5 - Parts List: This section contains exploded views of the print engineand optional Field Replaceable Units (FRUs), as well as part numbers for orderableparts.Chapter 6 - Maintenance: This section provides periodic cleaning procedures forthe printer. This section also provides procedures for the adjustment of printengine componentsChapter 7 - Wiring: This section contains the plug/jack locations and wiringdiagrams for the printer.Appendix - Reference: This section describes the operation of the CE Diagnosticsoftware used to test Phaser 3010/3040 operation.
