Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 5-3Parts ListsUsing the Parts List• ID No.: The callout number from the exploded part diagram.• Name/Description: The name of the part to be ordered and the number ofparts supplied per order.• Part Number: The material part number used to order that specific part.• Parts identified throughout this manual are referenced PL#.#.#; For example,PL3.1.10 means the part is item 10 of Parts List 3.1.• A Black triangle preceding a number followed by a parenthetical statement inan illustrated parts list means the item is a parent assembly, made up of theindividual parts called out in parentheses.• The notation “with X~Y” following a part name indicates an assembly that ismade up of components X through Y. For example, “1 (with 2~4)” means part1 consists of part 2, part 3, and part 4.• The notation “J1<>J2 and P2” is attached to a wire harness. It indicates thatconnector Jack 1 is attached to one end of the wire harness and connector J2is attached to the other end that is plugged into P2.NoteOnly parts with part numbers are available for ordering. Parts without partnumbers are available on the parent assembly.
