2-96 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 ServiceError TroubleshootingMisfeed JamPaper jam was detected at the Main or Bypass Tray.Applicable Error• 075-100: Misfeed JamInitial Actions• Check the media path for obstructions or debris.• Check condition of the Feed Roller and Separator Pad.• Cycle printer power.• If the problem persists, use the following procedure.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ Feed Solenoid, PL2.3.21■ Registration Sensor, PL2.3.10■ Main Drive Motor, PL6.1.1■ MCU Board, PL7.1.3■ “Map 2” on page 7-4■ “Drive” on page 7-14Troubleshooting Procedure TableStep Actions and Questions Yes No1 Test the Registration Sensor.Does the Registration Sensorfunction correctly?Go to Step 2. Replace theRegistrationSensor(page 4-30).2 Test the Main Drive Motor.Does the motor function correctly?Go to Step 3. Replace theMain DriveMotor(page 4-41)..3 Test the Feed Solenoid.Does the Feed Solenoid functioncorrectly?Go to Step 4. Replace theFeed Solenoid(page 4-32).4 Replace the MCU Board (page 4-43).Does the error persist?Contact yourdesignatedfield support forassistance.Complete.
