Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only A-7ReferenceTest PrintTwo test prints are available, Test pattern ASIC and LPH K. Select the pattern fromthe menu and click the print button.ParameterThis function reads/writes the parameters in the table. Click Apply new settings orRestart printer to apply new settings button after the setting is completed tochange the value in NVM.Print Counter Displays the respective counter values in themaster NVM and backup NVM. (read only)Clear All NVM Initializes the NVM of the Image ProcessorBoard.Clear Job Log Initializes the print job history.Apply New Settings This button should be clicked to move to anyother setting menu from the current menu inoperation.NOTE After completion of all operations the Restartprinter to apply new settings button should beclicked without exceptions.Restart printer to apply newsettingsClick this button when ready to apply yourchanges to the settings.The restart of a printer is required in order toconfirm this setup.Item Range Parameter FunctionRegistration -94 ~ 94 Regi Lead Offset Value of Lead Offset-68 ~ 68 Regi Side Offset Value of Side OffsetMachine - Total PV Counter of Total PV- FC PV Counter of FC PV- DEVE Round time K Counter of DEVE Round time- XERO Round time Counter of XERO Round time- K Dispense Time Counter of Dispense Time- K Pixel Counter of K Pixel- Sheets of Custom Mode Start Counter of Sheets of Custom Mode Start- Sheets of Custom Mode End Counter of Sheets of Custom Mode EndToner - K Toner PV Counter of Total PV- K Toner Pixel Counter of Toner Pixel- Life K Toner Dispense Time Counter of Toner Dispense Time- Life K Toner Waste toner count Counter of Toner Waste toner count
