Note:• The High Capacity Feeder (HCF) does not support printing on glossy paper.• Only one-sided printing is supported for glossy, or coated, paper.When printing on glossy paper, adhere to the following guidelines:• Do not open sealed packages of glossy paper until you are ready to load the paper into theprinter.• Store glossy paper flat, in the original packaging.• Before loading glossy paper, remove all other paper from the tray.• Load only the amount of glossy paper that you plan to use. When you are finished printing,remove the unused paper from the tray. Replace the unused paper in the original packaging andseal for later use.• Rotate paper frequently. Long periods of storage in extreme conditions can cause glossy paper tocurl and jam in the printer.PPaappeerr SSttoorraaggee GGuuiiddeelliinneessProviding good storage conditions for your paper and other media contributes to optimum printquality.• Store paper in dark, cool, relatively dry locations. Most paper is susceptible to damage fromultraviolet and visible light. Ultraviolet light emitted by the sun, and fluorescent bulbs, isdamaging to paper.• Reduce the exposure of paper to strong lights, or to visible light for long periods of time.• Maintain constant temperatures and relative humidity.• Avoid storing paper in attics, kitchens, garages, or basements. These spaces are more likely tocollect moisture.• Store paper flat, either on pallets, cartons, shelves, or in cabinets.• Avoid food or drinks in the area where paper is stored or handled.• Do not open sealed packages of paper until you are ready to load them into the printer. Leavestored paper in the original packaging.• Some special paper is packaged inside resealable plastic bags. Store the media inside the baguntil you are ready to use the media. Keep unused media in the bag, then reseal it for protection.Xerox® PrimeLink® B9100/B9110/B9125/B9136 Copier/PrinterUser Guide163Paper and Media
