CCoommbbiinnee OOrriiggiinnaall SSeettssThis feature allows you to copy sets of documents that cannot be loaded into the automaticdocument feeder. Use the document glass when copying documents that are damaged, ripped ortorn, or too wrinkled to go through the automatic document feeder. The Combine Original Setsfeature allows you to copy each original document on the document glass and create one copy jobfor the set.1. On the Services Home screen, touch Copy. Select the required copy settings, then enter thenumber of copies using the alphanumeric keypad on the control panel.2. Touch the Job Assembly tab, then touch Combine Original Sets.3. Touch On, then touch Save.4. Copy the first set of original documents:• If the first set of original documents is not damaged, place the documents in the automaticdocument feeder.• If the set of original documents is damaged, place the documents on the document glass.5. Press the green Start button on the control panel. Copying begins.6. Scan additional sets:a. Use the automatic document feeder or the document glass to copy the next set of originaldocuments.b. On the Copy screen, touch Next Original.7. Touch Start on the touch screen, or press the green Start button on the control panel.8. When the final set is copied, on the Combine Original Sets screen, touch Last Original.9. To cancel the job, touch Delete.FFoorrmm OOvveerrllaayyYou can make copies that overlay the first page of the document on the rest of the documents. Forexample, if the first page of the document has a header and footer only, you can copy the rest of thedocuments with the same header and footer.1. On the Services Home screen, touch Copy, then touch the Job Assembly tab.2. Touch Form Overlay.3. From the Form Overlay screen, touch On or Off.4. Touch Save.• If the first page is 2-sided, only the top side is used for the form overlay.• The Center/Corner Shift, Image Shift, Delete Outside/Delete Inside, Edge Erase, and BorderErase features are applied to the text body.DDeelleettee OOuuttssiiddee//DDeelleettee IInnssiiddee1. At the control panel, on the Services Home screen, touch Copy, then touch the Job Assembly tab.2. Touch Delete Outside/Delete Inside.3. Touch Delete Outside or Delete Inside.72 Xerox® PrimeLink® B9100/B9110/B9125/B9136 Copier/PrinterUser GuideCopying
