High Capacity Stacker (HCS) ComponentsNumber Component Description1 Paper jam or error indicators The indicators illuminate when a paper jam occurs in HCS areasE1–E8.2 Sample button Press this button to have the HCS deliver a sample sheet to thetop tray.The indicator to the left of the button blinks until a sample sheetis delivered to the top tray.3 Unload button Press this button to stop printing, then remove the paper.4 Top tray The tray receives the printed output and sample sheets.The top tray holds a maximum of 500 sheets, 330 x 488 mm (13x 19.2 in.).When another inline finishing device is installed, this tray is usedas a paper path for transporting media through the HCS toanother connected finishing device.5 Circuit breaker switch The circuit breaker switch is on the rear of the HCS. If there is anelectrical failure or a shorted circuit, the switch shuts off electricityautomatically.6 Top cover Open this cover to clear paper jams.7 Stacker tray or cart Collated sets, up to a total of 5000 sheets are transported to thestacker tray that is on a movable stacker cart.8 Front door Open this door to remove paper or printed output.Xerox® PrimeLink® B9100/B9110/B9125/B9136 Copier/PrinterUser Guide329High Capacity Stacker (HCS)
