Symptoms Yes/No Cause and ActionFor information about network settings, refer toXerox® PrimeLink® B9100/B9110/B9125/B9136Copier/Printer System Administrator Guide.If the problem is not solved, go to the next Causeand Action.Cause The network connection between the computer andprinter is incorrect.Action Contact your System Administrator.If the problem is not solved, go to the next Causeand Action.Cause The port is not enabled.Action Enable the port that is in use.For information about network settings, refer toXerox® PrimeLink® B9100/B9110/B9125/B9136Copier/Printer System Administrator Guide.If the problem is not solved, go to the next Causeand Action.Cause There is insufficient space on the hard drive.Action To increase the free space, delete unnecessary data.If the problem is not solved, go to the next Causeand Action.Cause The printer is connected to multiple computers.Action Wait, then try printing again.The printer is not printing acopy or a network print job.Yes Cause The printer is out of paper.Action Load paper into the printer paper tray.If the problem is not solved, go to the next Causeand Action.Cause Paper in the printer does not match the specifiedsize.Action Load paper that corresponds to the specified papersize.If the problem is not solved, go to the next Causeand Action.Cause The copy operation is performed during interruptmode, and the job is interrupted.Action Cancel the interrupt operation.If the problem is not solved, go to the next Causeand Action.198 Xerox® PrimeLink® B9100/B9110/B9125/B9136 Copier/PrinterUser GuideTroubleshooting
