d. Use the cleaning rod to sweep any remaining waste or debris from inside the trimmer intothe trimmer waste container.e. If you have difficulty sweeping waste into the trimmer waste container, use the cleaning rodto gather the waste, then remove the waste by hand.f. Return the levers to the original positions.7. Ensure that all waste and debris is removed, especially beneath the frame that is behind thewaste container. Use the cleaning rod to remove any remaining waste from inside the trimmer.Note: For information, refer to Emptying the Crease and Two-Sided Trimmer WasteContainer.8. Close the trimmer upper and lower covers.9. If a printer control panel message indicates that there are more paper jams, follow theinstructions to clear the paper jams and to resume printing.CCrreeaassee aanndd TTwwoo--SSiiddeedd TTrriimmmmeerr FFaauulltt MMeessssaaggeessWhen faults occur such as paper jams, open doors or covers, or a printer malfunction, the printer stopsprinting, then a message appears on the printer control panel. An illustration shows the location ofthe fault with a brief explanation of corrective actions to clear the fault. If a fault occurs in more thanone location, the illustration changes to indicate the multiple locations and the required correctiveactions.The printer control panel displays a Faults button that provides information about the fault anddetailed instructions to correct the fault. The E code in the upper-left part of the Fault message showswhich error indicator E1–E7 is illuminated on the Crease and Two-Sided Trimmer indicator panel.368 Xerox® PrimeLink® B9100/B9110/B9125/B9136 Copier/PrinterUser GuideCrease and Two-Sided Trimmer