Using CentreWare Internet Services to Configure Settings on the MachineXerox WorkCentre 7132 System Administration Guide 637. When the reboot message appears, select [Reboot Machine].NOTE: For more information about the contents of items, refer to the CentreWareInternet Services chapter of the User Guide.SSDPThis page allows you to configure the SSDP settings for the following options.NOTE: SSDP is available only after UPnP is enabled.NOTE: Some settings on this page will only be available after you restart CentreWareInternet Services, or after the machine is switched off and on.1. At the CentreWare Internet Services home page for the machine, select the[Properties] tab.2. In the [Properties] frame, select the plus symbol [+] to the left of the [ProtocolSettings] folder.3. Select [SSDP].4. Set up the following option to be displayed in the frame.• Valid Advertising Period – Specify the time during which the advertising periodremains valid.• Maximum TTL – Specify the maximum TTL (time to live).5. Select [Apply] to reflect the new setting.6. Enter the user ID and password, then select [OK].NOTE: The default user ID is "11111" and the default password is "x-admin".7. When the reboot message appears, select [Reboot Machine].NOTE: For more information about the contents of items, refer to the CentreWareInternet Services chapter of the User Guide.LDAPThis page allows you to configure the LDAP settings for the following options.NOTE: Some settings on this page will only be available after you restart CentreWareInternet Services, or after the machine is switched off and on.1. At the CentreWare Internet Services home page for the machine, select the[Properties] tab.2. In the [Properties] frame, select the plus symbol [+] to the left of the [ProtocolSettings] folder.3. Select [LDAP].
