-C OptionXerox WorkCentre 7132 System Administration Guide 87• +intervalThis option is used to specify the inquiry interval period for the duration of printing, untilall the data received has been printed. The interval is set up in seconds.The screen of the client is refreshed each time the information is returned.NOTE: Long file names will be truncated.NOTE: Information for a maximum of 64 print instructions can be displayed.NOTE: If two or more types of print languages/modes are set up on a singleworkstation, identical job numbers may be displayed when an inquiry command (lpq)is issued.Examples• To inquire about the print data received by a printer named fxPS, enter the followingcommand:%lpq -PfxPS• To display a printer named fxPS in long format, enter the following command:%lpq -PfxPS -l-C OptionOn SunOS, the -C option can be used to specify the print format if the machine printswith the PostScript language in spool mode.This section explains the functions which can be specified and printing operationswhich will be affected using the -C option.NOTE: When the PostScript logical printer that was configured using CentreWareInternet Services and the -C option have been specified simultaneously, some of theactions cannot be guaranteed to work. Also, when specifying the PostScript logicalprinter as a default printer on UNIX, it is recommended not to use the -C option.FunctionThe following items can be set up using the -C option.Selecting a paper trayWhen selecting a paper tray, specify either a paper size or a tray. If the paper size isspecified, the machine automatically searches and selects the tray.The following parameters can be specified.Parameter DescriptionINTRAY1/intray1 Selects Tray 1.INTRAY2/intray2 Selects Tray 2.
