GENERAL CHASSIS4-7EAS1MC1056ADJUSTING THE SIDE PANELSThe following procedure applies to both of theside panels.1. Adjust:• Side panel positionTIPThe side panel “1” can be opened 20 mm (0.79in) for added ventilation to suit the riding condi-tions.▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼To open a side panela. Remove the quick fastener “1”.b. Slide the side panel “2” forward to unhook itsprojections “a” from the lower slots “b”, andthen pull the panel off.c. Insert the projections “a” into the upper slots“c”, and then slide the panel backward.d. Install the quick fastener “1”.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼To close a side panela. Remove the quick fastener “1”.b. Slide the side panel “2” forward to unhook itsprojections “a” from the upper slots “b”, andthen pull the panel off.c. Insert the projections “a” into the lower slots“c”, and then slide the panel backward.d. Install the quick fastener “1”.TIPMake sure that the side panel is properly in-stalled.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS1MC1057REMOVING THE FRONT COWLING INNERPANEL1. Remove:• Headlight beam adjusting knob “1”A. Closed positionB. Open positiona. Lower slotsb. Upper slots1Aa1Bb21ab1caca1ba2ca 1ca