Yamaha FJR 1300 AE 2014 Service Manual

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE(ECU)9-1167 ISC (idle speed control)learning condition displayISC (idle speed control)learning data erasure00ISC (idle speed control)learning data has beenerased.01It is not necessary toerase the ISC (idle speedcontrol) learning data.02It is necessary to erasethe ISC (idle speed con-trol) learning data.To erase the ISC (idlespeed control) learningdata, set the start/enginestop switch from “ ” to“ ” 3 times in 5 seconds.70 Control number 0–254 [-] —80 Cruise control settingswitch “RES+”Push and release the“RES+” side of the cruisecontrol setting switch.• Switch is pushed ON• Switch is released OFF81 Cruise control settingswitch “SET–”Push and release the“SET–” side of the cruisecontrol setting switch.• Switch is pushed ON• Switch is released OFF82 Cruise control cancel cir-cuitOperate the clutch lever,brake lever, brake pedal,and throttle grip.• Clutch lever is squeezed ON• Clutch lever is released OFF• Brake lever is squeezed ON• Brake lever is released OFF• Brake pedal is de-pressedON• Brake pedal is released OFF• Throttle grip is turnedpast the closed positionin the deceleration direc-tionON• Throttle grip is released OFF83 Front brake light switchand rear brake light switchOperate the brake leverand brake pedal.• Brake lever is squeezed ON• Brake lever is released OFF• Brake pedal is de-pressedON• Brake pedal is released OFFDiagnosticcode No. Item Meter display Procedure