GENERAL CHASSIS4-12EAS1MC1061REMOVING THE WINDSHIELD BRACKETCOVERSThe following procedure applies to both of thewindshield bracket covers.1. Remove:• Windshield bracket outer cover “1”TIPSlide the windshield bracket outer cover upward,and then remove it.EAS1MC1064INSTALLING THE WINDSHIELD BRACKETCOVERSThe following procedure applies to both of thewindshield bracket covers.1. Install:• Windshield bracket inner cover “1”TIPHook the projection “a” on the windshield brack-et inner cover “1” onto the windshield bracket.2. Install:• Windshield• Windshield bracket outer cover “1”TIPFit the projections on the windshield bracket out-er cover into the holes in the windshield, andthen slide the cover downward.EAS1MC1062REMOVING THE CENTER COVERS1. Remove:• Center cover assembly “1”TIPUnhook the projections on the lower center cov-er from the front cowling and remove the centercover assembly.2. Remove:• Upper center coverTIPUnhook the projections on the upper center cov-er from the lower center cover and remove theupper center cover.EAS1MC1063INSTALLING THE CENTER COVERS1. Install:• Upper center coverTIPFit the projections on the upper center cover intothe holes in the lower center cover.1aa111