ELECTRICAL COMPONENTS8-208EAS1MC1086CHECKING THE FRONT TURN SIGNALLIGHT ASSEMBLIESThe following procedure applies to both of thefront turn signal light assemblies.1. Check:• Front turn signal light assemblyFaulty → Replace.▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Disconnect the front turn signal light assem-bly coupler from the wire harness.b. Connect the battery (DC 12 V) as shown.c. Check that the front turn signal light comeson.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS28250CHECKING THE RADIATOR FAN MOTORSThe following procedure applies to both of theradiator fan motors.1. Check:• Radiator fan motorFaulty/rough movement → Replace.▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Disconnect the radiator fan motor couplerfrom the wire harness.b. Connect the battery (DC 12 V) as shown.c. Check the radiator fan motor movement.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS28260CHECKING THE COOLANT TEMPERATURESENSOR1. Remove:• Coolant temperature sensorRefer to “THERMOSTAT” on page 6-6.WARNINGEWA14130• Handle the coolant temperature sensorwith special care.• Never subject the coolant temperature sen-sor to strong shocks. If the coolant temper-ature sensor is dropped, replace it.• Positive battery terminal →brown or green “1”• Negative battery terminal →black “2”A. Left sideB. Right sideGEARNA.TEMPC.TEMP1Y/LABr BrB11 2BY/LG GB11 2• Positive battery terminal →blue or yellow/blue “1”• Negative battery terminal →black “2”A. Left sideB. Right sideABY/L