Yamaha FJR 1300 AE 2014 Service Manual

REAR WHEEL4-33d. Remove the wheel sensor rotor.e. Remove the wheel bearings “1” with a gener-al bearing puller.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS22090CHECKING THE REAR WHEEL1. Check:• Rear wheel axle• Rear wheel• Wheel bearings• Oil sealRefer to “CHECKING THE FRONT WHEEL”on page 4-24.2. Check:• Tire• Rear wheelDamage/wear → Replace.Refer to “CHECKING THE TIRES” on page3-17 and “CHECKING THE WHEELS” onpage 3-17.3. Measure:• Radial wheel runout• Lateral wheel runoutRefer to “CHECKING THE FRONT WHEEL”on page 4-24.EAS22200MAINTENANCE OF THE REAR WHEELSENSOR AND SENSOR ROTORNOTICEECA3P6D008• Handle the ABS components with caresince they have been accurately adjusted.Keep them away from dirt and do not sub-ject them to shocks.• The rear wheel sensor cannot be disassem-bled. Do not attempt to disassemble it. Iffaulty, replace with a new one.• Keep magnets (including magnetic pick-uptools, magnetic screwdrivers, etc.) awayfrom the wheel sensor rotor.• Do not drop or shock the wheel sensor orthe wheel sensor rotor.1. Check:• Rear wheel sensorRefer to “MAINTENANCE OF THE FRONTWHEEL SENSOR AND SENSOR ROTOR”on page 4-25.2. Check:• Rear wheel sensor rotorRefer to “MAINTENANCE OF THE FRONTWHEEL SENSOR AND SENSOR ROTOR”on page 4-25.3. Measure:• Rear wheel sensor rotor deflectionRefer to “MAINTENANCE OF THE FRONTWHEEL SENSOR AND SENSOR ROTOR”on page 4-25.EAS22140ASSEMBLING THE REAR WHEELNOTICEECA3P6D003• Keep magnets (including magnetic pick-uptools, magnetic screwdrivers, etc.) awayfrom the wheel sensor rotor.• Do not drop the wheel sensor rotor or sub-ject it to shocks.• If any solvent gets on the wheel sensor ro-tor, wipe it off immediately.1. Install:• Bearing “1”Radial wheel runout limit1.0 mm (0.04 in)Lateral wheel runout limit0.5 mm (0.02 in)21Wheel sensor rotor deflectionlimit0.14 mm (0.0055 in)Installed depth of bearing “a”3.5–4.5 mm (0.14–0.18 in)