GENERAL CHASSIS (5)4-10EAS31266REMOVING THE FRONT UPPER PANEL1. Remove:• Front upper panel▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Remove the screws.b. Unhook the projections on the front upperpanel from the side cowlings.c. Pull the front upper panel upward to removethe projection from the grommet in the head-light unit.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS31267INSTALLING THE FRONT UPPER PANEL1. Install:• Front upper panel▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Push the front upper panel rearward to fit theprojection into the grommet in the headlightunit.b. Fit the projections on the front upper panelinto the slots in the side cowlings.c. Install the screws.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS31268REMOVING THE METER ASSEMBLY COVER1. Remove:• Meter assembly cover▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Remove the screws.b. Slide the meter assembly cover forward andremove it.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS31269INSTALLING THE METER ASSEMBLYCOVER1. Install:• Meter assembly coverT R..Front upper panel screw1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)