GENERAL CHASSIS (9)4-22EAS31286REMOVING THE BOTTOM COVERSThe following procedure applies to both of thebottom covers.1. Remove:• Bottom cover▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Remove the quick fastener screws andscrews.b. Unhook the projections on the bottom coverfrom the slots in the footrest board.c. Pull the bottom cover outward and removethe projection on the bottom cover from thegrommet in the front cowling lower inner pan-el.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲EAS31287INSTALLING THE BOTTOM COVERSThe following procedure applies to both of thebottom covers.1. Install:• Bottom cover▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼a. Fit the projection on the bottom cover into thegrommet in the front cowling lower inner pan-el.b. Fit the projections on the bottom cover intothe slots in the footrest board.c. Install the screws and quick fastener screws.▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲T R..Bottom cover screw (lower side)4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)Bottom cover screw (upper side)1.5 Nm (0.15 m·kgf, 1.1 ft·lbf)