Yamaha MBK MW125 2014 Service Manual

STEERING HEAD4-86EAS31226INSTALLING THE LINK ARMS AND LOWERBRACKET PIPES1. Install:• Bearing “1”, “2”(to the front lower link arm)2. Install:• Rear lower link arm “3”• Main switch bracket “4”• Rear lower link arm bolts “5”(temporarily tighten)TIPDo not fully tighten the bolts.3. Install:• Luggage hook “6”• Main switch bracket bolts “7”(temporarily tighten)TIP• Do not fully tighten the bolts.• Make sure that the bottom “a” of the luggagehook contacts the frame.4. Install:• Lower bracket pipes “8”• Rear lower link arm bolts (to lower bracketpipe) “9”(temporarily tighten)• Front lower link arm “10”• Rear lower link arm bolts (to front lower linkarm) “11”(temporarily tighten)• Front lower link arm bolts (to lower bracketpipe) “12”(temporarily tighten)• Upper link arm “13”• Upper link arm bolts (to lower bracket pipe)“14”(temporarily tighten)• Front cowling assembly bracket “15”• Front upper link arm nut “16”(temporarily tighten)• Front lower link arm nut “17”(temporarily tighten)TIPDo not fully tighten the bolts.5. Tighten:• Rear lower link arm bolts “5”• Front upper link arm nut “16”• Front lower link arm nut “17”• Main switch bracket bolts “7”• Rear lower link arm bolts (to lower bracketpipe) “9”• Front lower link arm bolts (to lower bracketpipe) “12”• Upper link arm bolts (to lower bracket pipe)“14”• Rear lower link arm bolts (to front lower linkarm) “11”Install depth “a”3.0 mm (0.12 in)4213a12aa1a677