7-24SETTING TUN9Rear shock absorberNOTE:9If any of the following symptoms is experienced with the standard position as the base, make reset-ting by reference to the adjustment procedure given in the same chart.9Adjust the rebound damping in 2-click increments or decrements.9Adjust the low compression damping in 1-click increments or decrements.9Adjust the hight compression damping in 1/6 turn increments or decrements.SectionSymptom Jump Large Medium Small Check Adjustgap gap gapRebound damping Turn adjuster counterclockwise (about 2 clicks)Stiff, tending to 1 1 to decrease damping.sink Spring set length Set sunken length for 90~100 mm (3.5~3.9 in)when one passenger is astride seat.Spongy and Rebound damping Turn adjuster clockwise (about 2 clicks) to in-unstable crease damping.1 1 Low compression Turn adjuster clockwise (about 1 click) to in-damping crease damping.Spring Replace with stiff spring.Heavy and Rebound damping Turn adjuster counterclockwise (about 2 clicks)dragging 1 1 to decrease damping.Spring Replace with soft spring.Rebound damping Turn adjuster counterclockwise (about 2 clicks)to decrease damping.Low compression Turn adjuster clockwise (about 1 click) to in-damping crease damping.Poor road gripping 1 High compression Turn adjuster clockwise (about 1/6 turn) todamping increase damping.Spring set length Set sunken length for 90~100 mm (3.5~3.9 in)when one passenger is astride seat.Spring Replace with soft spring.High compression Turn adjuster clockwise (about 1/6 turn) to in-damping crease damping.Bottoming out 1 1 Spring set length Set sunken length for 90~100 mm (3.5~3.9 in)when one passenger in astride seat.Spring Replace with stiff spring.Rebound damping Turn adjuster clockwise (about 2 clicks) to in-Bouncing 1 1 crease damping.Spring Replace with soft spring.High compression Turn adjuster counterclockwise (about 1/6damping turn) to decrease damping.Stiff travel 1 1 Spring set length Set sunken length for 90~100 mm (3.5~3.9 in)when one passenger is astride seat.Spring Replace with soft spring.
