4-6ENGINE ENGNOTE:47 Nm (4.7mkg)55 Nm (5.5 mkg)39 Nm (3.9 mkg)24 Nm (2.4 mkg)13 Nm (1.3 mkg)NOTE:70Nm (7.0 mkg)10 Nm (1.0 mkg)NOTE:10 Nm (1.0 mkg)NOTE:EAS00192INSTALLING THE ENGINE1. Install: engine mounting adjust bolts 1 rear mounting bolts 2 self-locking nuts 3 collars 4 front mounting bolts 5 collars 6 button head bolts 7 pinch bolts 8 Lubricate the rear mounting bolt threads withlithium soap base grease. Do not fully tighten the nuts and bolts.2. Tighten: self-locking nut front mounting bolts button head bolt pinch bolt M8M6 engine adjusting boltsUse the pivot shaft wrench 1 to tighten the en-gine mounting adjust bolt to finger tightness.Pivot shaft wrench90890-014713. Install: drive sprocket4. Install: drive sprocket coverRefer to “CABLE ROUTING” in chapter 2.5. Install: shift arm 1Align the punch mark a in the shift shaft withthe slot in the shift arm.
