4-10CAMSHAFTS ENGNOTE:CAUTION:NOTE:EAS00198REMOVING THE CAMSHAFTS1. Align: TDC mark on the pickup coil rotor (with thecrankcase mating surface)a. Turn the crankshaft clockwise.b. When piston #1 is at TDC on the compres-sion stroke, align the mark a on the pickupcoil rotor with the crankcase mating surfaceb .TDC on the compression stroke can be foundwhen the camshaft lobes are turned away fromeach other.2. Remove: timing chain tensioner3. Remove: camshaft cap dowel pinsTo prevent damage to the cylinder head,camshafts or camshaft cap, loosen the cam-shaft cap bolts in stages and in a crisscrosspattern, working from the outside in.4. Remove: intake camshaft 1 exhaust camshaft 2To prevent the timing chain from falling into thecrankcase, fasten it with a wire 3 .5. Remove: timing chain guide (exhaust side)
