7-48FRONT FORK CHASWARNINGNOTE:WARNINGCAUTION:4. Check: cap bolt O-ringDamage/wear Replace.EAS00661ASSEMBLING THE FRONT FORK LEGSThe following procedure applies to both of thefront fork legs. Make sure that the oil levels in both frontfork legs are equal. Uneven oil levels can result in poor han-dling and a loss of stability. When assembling the front fork leg, be sure toreplace the following parts:- inner tube bushing- outer tube bushing- oil seal- dust seal Before assembling the front fork leg, makesure that all of the components are clean.1. Install: oil lock piece inner tube 2 damper rod assembly 1Always use new copper washers.Allow the damper rod assembly to slideslowly down the inner tube 2 until it pro-trudes from the bottom of the inner tube. Becareful not to damage the inner tube.2. Lubricate: inner tube’s outer surfaceRecommended lubricantYamaha fork and suspension oil01 or equivalent
