7-6FRONT WHEEL AND BRAKE DISCS CHAS72 Nm (7.2 mkg)20 Nm (2,0 mkg)CAUTION:40 Nm (4.0 mkg)WARNINGNOTE:Brake disc bolt18 Nm (1,8 mkg)LOCTITEd. Measure the brake disc deflection.e. If out of specification, repeat the adjustmentsteps until the brake disc deflection is withinspecification.f. If the brake disc deflection cannot be broughtwithin specification, replace the brake disc.EAS00545INSTALLING THE FRONT WHEEL1. Lubricate: wheel axle oil seal lipsRecommended lubricantLithium soap base grease2. Tighten: wheel axle 1 wheel axle pinch bolt 2Before tightening the wheel axle nut, pushdown hard on the handlebars several timesand check if the front fork reboundssmoothly.3. Install: brake calipers brake hose holdersMake sure that the brake hose is routedproperly.EAS00549ADJUSTING THE FRONT WHEEL STATICBALANCE After replacing the tire, wheel or both, the frontwheel static balance should be adjusted. Adjust the front wheel static balance with thebrake discs installed.