Yamaha YZF-R6 Service Manual
Also see for 1999 YZF-R6: Service manual
                                                                                                                                                                                                                                                                                                                                                                                                                                         | |
Contents
|
8-17ELECTRIC STARTING SYSTEM ELECEB803010STARTING CIRCUIT CUTOFF SYSTEM OP-ERATIONIf the engine stop switch is set to “ ” and themain switch is set to “ON” (both switches areclosed), the starter motor can only operate if atleast one of the following conditions is met: The transmission is in neutral (the neutralswitch is closed). The clutch lever is pulled to the handlebar (theclutch switch is closed) and the sidestand is up(the sidestand switch is closed).The starting circuit cutoff relay prevents thestarter motor from operating when neither ofthese conditions has been met. In this instance,the starting circuit cutoff relay is open so currentcannot reach the starter motor. When at leastone of the above conditions has been met thestarting circuit cutoff relay is closed and the en-gine can be started by pressing the start switch.WHEN THE TRANSMISSION IS INNEUTRALWHEN THE SIDESTAND IS UP ANDTHE CLUTCH LEVER IS PULLED TOTHE HANDLEBAR1 Battery2 Main fuse3 Main switch4 Ignition fuse5 Engine stop switch6 Starting circuit cutoff relay7 Diode8 Clutch switch9 Sidestand switch10 Neutral switch11 Start switch12 Starter relay13 Starter motor |
Related manuals for Yamaha 1999 YZF-R6
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine